Rockwell Automation 1203-SM1 SLC to SCANport Communication Module User Manual
Page 33
Advertising
4–5
Using Enhanced Mode
Publication 1203–5.9 –– October 1996
11. The slot is now configured for the SLC to SCANport module to
be used in enhanced mode. This is shown in Figure 4.4
Figure 4.4
Example I/O Configuration Screen
12.Press F9 to add the information to configure the specialty I/O
using the screen shown in Figure 4.5.
Figure 4.5
Specialty I/O Configuration Screen
If you are not familiar with G files and M0/M1 files, you should read
the sections that are provided later in this chapter that pertain to these
files before continuing.
13.Press F7 to set the G file size a value from 2 to 32 words using
the screen shown in Figure 4.5.
"
Advertising