Rockwell Automation 1203-SM1 SLC to SCANport Communication Module - Manual (Page 34)

4–6 Using Enhanced Mode
Publication 1203–5.9 –– October 1996
14.Press F3 to configure the G file data using the screen shown in
Figure 4.6. Figure 4.8 provides the definition of the G file data.
Figure 4.6
Screen Used to Configure G File Data
15.When you return to the screen shown in Figure 4.5, press F5 to
access the advanced set up menu to configure the size of the
messaging buffers.
16.Press F5 to enter the size of the M0 file. For this module, the
maximum file size is 800.
17.Press F6 to enter the size of the M1 file. For this module, the
maximum file size is 400.