Configure the ab_eth/ip driver – Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 114
Advertising
102
Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
Appendix C Configure the RSLinx Ethernet Communication Driver
Configure the AB_ETH/IP
Driver
To configure the AB-ETHIP Ethernet communication driver, perform the
following steps.
1. Start the RSLinx software.
2. From the Communications menu, select Configure Drivers.
3. Select EtherNet/IP Devices from the list and click Add/New...
Advertising