Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 68)

58 Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
Chapter 5 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
3. Select the 1738-AENT/B adapter from the list and click Create.
The New Module dialog opens.
4. Enter values for Name and IP address, noting we used the following values.
.
5. Click Change...
The Module Definition dialog opens.
Name ArmorPoint IO Adapter
IP Address 10.88.70.2
IMPORTANT Note that the slot field is disabled because the slot is automatically 0
for the I/O adapter.