Download the program to the controller – Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 55
Advertising
Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
45
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
2. Enter the following ladder program using the tags previously created.
3. Save the program.
Download the Program to
the Controller
Follow this procedure to download the program we just saved to the
ControlLogix controller.
1. From the main menu, choose Communications>Who Active.
2. Navigate to select the slot where the controller is located in the chassis.
3. Choose Set Project Path.
Advertising