Create the example application – Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 35
Advertising
Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
25
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
Create the Example
Application
Perform the following steps to create the example application:
1. Start RSLogix 5000 Enterprise Series software.
The RSLogix 5000 main dialog opens.
2. From the File menu, select New.
The New Controller dialog opens.
3. Enter an appropriate Name for the Controller, for example,
ArmorPOINT_IO_Controller.
4. Select the correct Revision, Chassis Type, and Slot number of the L63
controller, and the folder where you want to save the RSLogix 5000 file
(Create In). The Description is optional.
5. Click OK.
Advertising