Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 76)

66 Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
Chapter 5 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
3. From the modules listed select the 1738-IE2CM12 and click Create.
The New Module dialog opens.
4. Enter values for Name and Slot, noting that we used the following values
Note the module definition properties on the bottom left of the New
Module dialog. You have the option to change these properties by clicking
the Change... button. Some of the properties cannot be modified while
pending edits exist.
TIP In the Select Module Type dialog, you have options to search for a
specific module, add modules to a Favorites list, filter by Category
and/or Vendor, Hide and Show Filters, use Module Discovery, sort by
vendor, or access your Favorites list.
Name ArmorPoint Analog Current Input
Slot 2