Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 57)

Rockwell Automation Publication 1738-UM005A-EN-P - July 2013 47
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
You see the Module Fault error code.
5. Click the Chassis Size tab.
6. Click Set Chassis Size in Module.
7. Read and acknowledge the warning screen.
8. Click OK to continue.
Value from
RSLogix 5000
Value stored
in 1738-AENT