Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 40)

30 Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 Software
3. Select your adapter from the list and click Create.
The New Module dialog opens.
4. Select the General Tab and enter the module details, noting that we used
the following values.
Note the module definition properties on the bottom left of the New
Module dialog. You have the option to change these properties by clicking
the Change button. Some of the properties cannot be modified while
pending edits exis
5. Click Change...
The Module Definition dialog opens.
Name ArmorPoint IO Adapter
IP Address 10.88.70.2
IMPORTANT Note that the slot field is disabled because the slot is automatically 0
for the 1738-AENT adapter.