Download the program to the controller – Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 81
Advertising
Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
71
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software Chapter 5
Download the Program to
the Controller
Follow this procedure to download the program we just saved to the
ControlLogix controller.
1. From the main menu, choose Communications>Who Active.
2. Navigate to select the slot where the controller is located in the chassis.
3. Choose Set Project Path.
4. Choose Download for both instances.
Notice that the 1756-ENBT Bridge is now online. If yellow triangles are
present, see the following section.
Advertising