Create the ladder program – Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 54
Advertising
44
Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 Software
2. Click the Edit Tags tab at the bottom of the Controller Tags dialog and
create the following tag:
Create the Ladder Program
Next, create the example ladder program to test the I/O.
1. Under the MainProgram folder, double-click MainRoutine.
Tag
Type
Parts_Count
Counter
Advertising