Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual User Manual
Page 113
Advertising
Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
113
Install and Replace Components
Chapter 5
4. Disconnect the touch screen connector.
5. Remove the screws from the back of the display module.
The number of screws varies for each terminal type.
6. Remove the sealing gasket.
7. Lift the back of the display module away from the bezel.
Work on a clean, flat, stable surface to protect the display from debris,
scratches, and damage.
8. Detach the connectors:
• Function key connector
• Connector on keypad or keypad/touch units
9. Set the bezel aside.
Plate
Touch Screen Connector
Display Module Bezel
Advertising