Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual User Manual
Page 80
Advertising
80
Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
Chapter 4
Windows CE Operating System
8. Click Restore.
The restore automatically includes advanced
network and display settings if this option was
checked when the backup was performed.
9. Click Yes to start the restore.
The terminal starts the restore process. It can take a
few minutes.
When the restore has completed successfully, the terminal restarts.
IMPORTANT
d
Do not remove the USB drive or SD card, or power
off the terminal during the restore. This could
corrupt the firmware.
If the restore fails, you need to reset the terminal
from the maintenance menu.
Refer to
Maintenance Operations on page 151
for
details.
Advertising