Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 9)

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014 9
Preface
This manual describes how to install, configure, operate, and troubleshoot the
PanelView™ Plus 6 Compact terminals. It does not provide procedures on how to
create applications that run on the terminal.
You also need to do the following:
• Use FactoryTalk® View Studio for Machine Edition to create a
human-machine interface (HMI) application to run in the terminal.
• Create ladder logic to interact with the HMI application.
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/literature/ . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
This product ships with these items:
• Terminal with FactoryTalk View Machine Edition runtime software
installed and activated
• Product information
• Mounting levers for panel installation
• Panel cutout template
Firmware Upgrades For the latest firmware upgrades and other downloads for PanelView Plus 6
Compact terminals, go to
http://www.rockwellautomation.com/support and
click Firmware Updates.
Resource Description
PanelView Plus Specifications Technical Data, publication
2711P-TD005
Provides technical specifications, environmental
specifications, and certifications for the
PanelView Plus Compact terminals.
Industrial Automation Wiring and Grounding Guidelines,
publication
1770-4.1
Provides general guidelines for installing a Rockwell
Automation® industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and
other certification details.