Keypad properties, Repeat tab, Touch properties – Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual User Manual
Page 83: Calibration, Double-tap, Keypad properties touch properties
Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
83
Windows CE Operating System
Chapter 4
Keypad Properties
Use the Keypad and Keyboard dialog boxes to adjust settings for the membrane
keypad of your terminal or an attached USB keyboard. The Keyboard icon is
always present. Keypad appears only if your terminal has a keypad.
Repeat Tab
The Repeat tab on the Keypad/Keyboard Properties dialog box enables and
disables the character repeat behavior of keys on the keypad or attached
keyboard.
When character repeat is enabled, you can set the repeat delay and repeat rate of
keys. Verify your settings by pressing a key in the test edit box.
Touch Properties
Touch Properties is accessible only on devices with a touch screen. It lets you
calibrate the touch screen and set the sensitivity of touch screen taps.
Calibration
The Calibration tab lets you recalibrate the touch screen if your device is not
responding appropriately to taps. Follow the instructions in the dialog box to
recalibrate.
Double-Tap
The Double-Tap tab on the Touch Properties dialog box lets you set and test the
double-tap sensitivity of the touch screen taps.