Connecting a remote relay reset signal – Rockwell Automation 1440-TPR06-00RE XM-360 Process Module User Manual
Page 30
Advertising
Publication GMSI10-UM006C-EN-P - August 2010
22 Installing the XM-360 Process Module
Figure 2.9 4-20mA Output Connections
Figure 2.10 4-20mA Output Connections cont.
Connecting a Remote Relay Reset Signal
If you set the relay to latching and the relay activates, the relay stays activated
even when the condition that caused the alarm has ended. The remote relay
reset signal enables you to reset the relay remotely after you have corrected the
alarm condition.
Advertising