Rockwell Automation 1440-TPR06-00RE XM-360 Process Module - Manual (Page 98)

Publication GMSI10-UM006C-EN-P - August 2010
90 DeviceNet Objects
Services
Analog Input Point Object
(Class ID 0A
H
)
The Analog Input Point Object models simple analog measurements
performed by the XM-360 module. There are six instances of the Analog
Input Point object, one for each input channel.
Class Attributes
Instances
Table C.18 Connection Object Services
Service
Code
Class/Instance Usage Name
05
h
Instance Reset
0E
h
Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
Table C.19 Analog Input Point Object Class Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
1 Get Revision UINT Revision of the
implemented object. 2
Table C.20 Analog Input Point Object Instances
Instance Name Description
1 Channel 1 Measurements Process (DC) measurement and Rate of
Change for channel 1.
2 Channel 2 Measurements Process (DC) measurement and Rate of
Change for channel 2.
3 Channel 3 Measurements Process (DC) measurement and Rate of
Change for channel 3.
4 Channel 4 Measurements Process (DC) measurement and Rate of
Change for channel 4.
5 Channel 5 Measurements Process (DC) measurement and Rate of
Change for channel 5.
6 Channel 6 Measurements Process (DC) measurement and Rate of
Change for channel 6.