Manually resetting relays – Rockwell Automation 1440-TPR06-00RE XM-360 Process Module User Manual
Page 50
Advertising
Publication GMSI10-UM006C-EN-P - August 2010
42 Installing the XM-360 Process Module
Manually Resetting Relays
The XM-360 has an external reset switch located on top of the module, as
shown in Figure 2.33.
Figure 2.33 Reset Switch
The switch can be used to reset all latched relays in the Expansion Relay
module when it is connected to the XM-360.
IMPORTANT
The Reset switch resets the relays only if the input is no
longer in alarm or the condition that caused the alarm is no
longer present.
PROCESS
1440-TUN06-00RE
Press the Reset
Switch to reset the
relays
Advertising