Rockwell Automation 1440-TPR06-00RE XM-360 Process Module - Manual (Page 68)

Publication GMSI10-UM006C-EN-P - August 2010
60 Configuration Parameters
Device Mode Parameters The Device Mode parameters are used to control the functions and the
behavior of the device.
IMPORTANT
The XM Serial Configuration Utility handles these
parameters automatically and transparently to the user.
Device Mode Parameters
Parameter Name Description Values/Comments
Device Mode Sets the current operation mode of the device. Refer
to Changing Operation Modes on page 67 for more
information. Options: Run Mode
Program Mode
Autobaud Enables/disables autobaud.
When autobaud is set to "Enabled," the module will
listen to other devices on the network to determine
the correct baud rate to use for communications.
When autobaud is set to "Disabled," the module
baud rate must be set manually.
Options: Enabled
Disabled