Rockwell Automation Liqui-Flo AC Power Modules - Manual (Page 11)

Introduction 1-1
C
HAPTER
1
Introduction
This instruction manual describes the LiquiFlo
™ drive’s Power Module and regulator
hardware. It does not cover the LiquiFlo software. For software information, refer to the
LiquiFlo AC General Purpose (V/Hz) and Vector Duty Drive Software Start-Up and
Reference Manual (D2-3410).
This manual is intended for qualified electrical and plumbing personnel.
LiquiFlo drives will typically be referenced by frame size. If additional clarity is
required, drive model numbers wil also be included.
1.1 Related Publications
Refer to the following related publications as necessary for more information:
• D2-3410 - LiquiFlo AC General Purpose (V/Hz) and Vector Duty Drive Software
Start-Up and Reference Manual
• D2-3305 - Motor Encoder Cable Kit
• D2-3348 - Control and Configuration Software (CS3000)
• D2-3341 - Remote Meter Interface Board
• D2-3342 - Operator Interface Module
• D2-3449 - LiquiFlo AC Drive Panel Mount Kit
1.2 Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance, call
1-864-284-5444.