Rockwell Automation Liqui-Flo AC Power Modules - Manual (Page 68)

7-12 LiquiFlo AC Power Modules, Hardware Reference Version 6.4
Table 7.8 - Wiring Signal and Control I/O to the Terminal Strip (Continued)
Terminal
Number Description Parameters/Wiring Connections
Wiring Analog Speed Reference Inputs
12
13
14
15
Isolated Reference Voltage
(+10VDC)
Analog Speed/Torque
Reference Input Voltage (+/-
10VDC)
Analog Speed/Torque
Reference Input Current
(0-20mA)
Isolated Speed/Torque
Reference Common
(Voltage/Current)
Related parameters:
• P.000: Control Source
• P.009: Terminal Strip Analog Input Offset
• P.010: Terminal Strip Analog Input Gain
• P.011: Terminal Strip Analog Input Configure
Refer to the LiquiFlo Software Start-Up and Reference
manual for additional parameter information.
Jumper J4 must also be set. See figure 2.4.