Metrohm 881 Compact IC pro – Anion – MCS - Manual (Page 26)

3.3 Installation diagram
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
881 Compact IC pro – Anion – MCS
3 MSM eluent inlet capillary
Labeled with in. 4 MSM eluent outlet capillary
Labeled with out.
5 Detector inlet capillary 6 Detector outlet capillary
7 Regeneration solution aspirating capil-
lary (6.1803.020) 8 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the regen-
eration solution.
9 MSM regeneration solution inlet capil-
lary
Labeled with regenerant. 10 MSM regeneration solution outlet
capillary
Labeled with waste reg..
11 Rinsing solution aspirating capillary
(6.1803.020)
12 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the rinsing
solution.
13 MSM rinsing solution inlet capillary
Labeled with rinsing solution.
14 MSM rinsing solution outlet capillary
Labeled with waste rins..
15 MCS aspirating capillary
For aspirating air low in CO
2
out of the CO
2
cartridge.
16 Sample aspirating capillary
(6.1803.040)
Connection Sample Degasser – Sample Pro-
cessor.
17 Sample aspirating capillary
(6.1803.040)
Connected to the injection valve. Can be
connected to the sample degasser if the
sample matrix requires it.
18 Sample outlet capillary (6.1803.040)
19 PEEK pressure screws, short
(6.2744.070)
20 Tubing olive (6.2744.034)
For connecting capillaries to the aspiration
side of the peristaltic pump.
21 Pump tubing connection (6.2744.180)
With safety device and filter, for connecting
capillaries to the outlet side of the peristaltic
pump.
22 PEEK pressure screws, long
(6.2744.090)
23 Luer coupling (6.2744.120)
Mounted on the MCS aspirating capillary
with a short pressure screw (6.2744.070).
For connecting the CO
2
adsorption car-
tridge.