Metrohm 881 Compact IC pro – Anion – MCS - Manual (Page 84)

5.5 High pressure pump
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
74 ￭￭￭￭￭￭￭￭
881 Compact IC pro – Anion – MCS
1
2
Figure 34 Removing the piston seal
1 Piston seal 2 Tool for piston seal
Pin of the tool.
2 Inserting the new piston seal into the tool
Insert the new piston seal tightly by hand into the recess of the
sleeve of the tool for the piston seal (33-2). The sealing springs must
be visible from the outside.
1
2
Figure 35 Inserting the piston seal into the tool
1 Tool for piston seal (6.2617.010)
Sleeve for inserting the new piston seal. 2 Piston seal
Order number: 6.2741.020
3 Inserting the new piston seal into the pump head
Guide the sleeve of the tool for the piston seal (33-2) with inserted
piston seal into the pump head and press the seal with the wide end
of the tool for the piston seal (33-1) into the pump head recess.