Metrohm 881 Compact IC pro – Anion – MCS - Manual (Page 83)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation and maintenance
881 Compact IC pro – Anion – MCS
￭￭￭￭￭￭￭￭ 73
for removing the old piston seal and a sleeve for inserting the new piston
seal.
2
1
Figure 33 Tool for piston seal
1 Pin
Tip for removing the old piston seal. 2 Sleeve
Sleeve for inserting the new piston seal.
Caution
Screwing the special tool for the piston seal (6.2617.010) into the pis-
ton seal destroys this completely!
1 Removing the piston seal
Caution
Avoid touching the sealing surface in the pump head (14-4) with
the tool.
Screw the special tool for the piston seal (33-1) with the narrow side
just as far into the piston seal as the same can be removed.