Metrohm 817 Bioscan - Manual (Page 41)

2.6 Preparing the 817 Bioscan for the analysis
817 Bioscan
33
2.6.3 Set operating mode
1 Manual control of the 817Bioscan
• In the instrument window of the Bioscan (double-click with the
mouse on the instrument symbol) select Mode: Pulse for
pulse amperometric detection.
• The cell must remain deactivated for as long no eluent flows
through the flow-through measuring cell.
• The oven is set to e.g. 32 °C. In general this temperature
should be at least 10 °C higher than the ambient room tem-
perature.