Metrohm 817 Bioscan - Manual (Page 48)

3 Operation
817 Bioscan
40
Filter Electronic damping of the analog output
(REC) and RS232 signal.
Selection:
0.1, 0.2, 0.5, 1, 2, 5 s
Offset Offset of the zero point.
Selection:
-50 ... +50 % (in steps of 10 %)
Actual
Cell potential Display of current cell potential in V
Oven Display of current oven state.
Range Display of current measuring range.
Full scale Display of current full-scale range.
Filter Display of current damping constant.
Offset Display of current offset.
<Set> Sends current parameters immediately to
the 817 Bioscan. Parameters are not stored
in the system file (
*.smt ) as long as the file
is not saved.