Metrohm 817 Bioscan - Manual (Page 50)

3 Operation
817 Bioscan
42
Full scale The full-scale range (operating range) sets
the desired sensitivity for the analog output.
The possible values of the full-scale range
depend on the preset measuring
Range . For
RS232 data (IC Net 2.1), always the maxi-
mum settings should be used.
Offset Offset of the zero point.
Selection:
-50 ... +50 % (in steps of 10 %)
Actual
E1, E2, E3 Display of current potentials in V.
t1, t2, t3 Display of current time durations for poten-
tials in s.
Sample time Display of current sample time in ms.
Oven Display of current oven state.
Range Display of current measuring range.
Full scale Display of current full-scale range.
Offset Display of current offset.
Cycle potentials Graphical display of cycle potentials.
Method Display of potentials set in the Method data
frame.
Actual Display of current potentials.
<Set> Sends current parameters immediately to
the 817 Bioscan. Parameters are not stored
in the system file (
*.smt ) as long as the file
is not saved.