ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 22)

3-1
C H A P T E R 3
Hardware Installation
The ADS ® RainAlert II ™ monitor and tipping bucket can be
installed together or separately based on the location and project
requirements. The monitor can mount independently to a wall or
with the tipping bucket using the available base plate and sun
shield. For an outdoor installation, the sun shield provides added
protection to the monitor against the sun and inclement weather
conditions.
The tipping bucket can mount independently to the available base
plate or to the top of the sun shield when installed with the monitor.
It is designed to be installed on a rooftop, an open field, or any
other unobstructed surface.
Following is the basic procedure for installing the RainAlert II
monitor and a tipping bucket at a location. The order of these steps
may vary based on the location and application.
 Investigate the Site Characteristics This involves
investigating and selecting the appropriate location to install
the tipping bucket and monitor.
 Gather the Parts and Supplies
 Gather the Tools and Equipment
 Install the Tipping Bucket This step involves securing the
tipping bucket to the base plate or sun shield at the designated
rainfall collection location.