ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 59)

4-18 ADS RainAlert II Manual
Separating the insulated wires
3. Cut off both the orange and the orange/white-striped wires
down to the level of the external insulation. These wires will
not be used in this application.
Note: The wire colors referenced in this manual are based
on the telephone cable recommended for use in these
applications. However, the wires inside some telephone
cables may vary in color and number. Therefore, when the
actual wire colors and number differ from those designated
in this manual, connect the available wiring in reference to
ground, ring, and tip.
4. Strip ½ inch of insulation from the remaining blue and
blue/white-striped wires.