ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 37)

3-16 ADS RainAlert II Manual
5. (optional wall-mount sun shield) Secure a sun shield (ADS p/n
6000-0047) to the wall directly above the monitor using the
appropriate mounting hardware/fasteners. This shield serves as
a visor to provide outdoor protection for the monitor.
RainAlert II installed with the optional wall-mount sun shield
Mounting the Monitor on the Base Plate
Locating the monitor and tipping bucket in the same location does
not require securing the monitor to the base plate. The monitor
merely sits on top of the base plate for easy removal during
maintenance or service activities.
First, make sure the sun shield has been secured to the base plate
using the screws provided. Then, simply slide the monitor onto the
base plate, from the open side of the sun shield, until it is resting
completely under the sun shield.