ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 36)

Hardware Installation 3-15
Mounting the Monitor to a Wall
Mount the monitor directly to a wall or other flat surface,
independent of the tipping bucket, in the following way:
1. Select the appropriate mounting hardware/fasteners to secure
the monitor to the surface. For wall mounting, consider using
¼-inch fasteners.
2. Place the monitor against the surface at the exact location at
which you want to mount the monitor and mark the wall
through each of the pre-drilled holes on the monitor enclosure,
or mark the wall at the desired location for the pre-drilled holes
according to the following mounting dimensions:
 Top-to-bottom: 12.75 inches
 Left-to-right: 8.00 inches
 Mounting hole diameter: 0.31 inches
www.adsenv.com
TM
R
Wall mounting dimensions
3. Pre-drill the holes to prepare the surface to receive the
mounting hardware/fasteners for mounting the monitor.
4. Mount and secure the monitor to the wall using the four
fasteners.
Note: Avoid over-tightening the fasteners to prevent
damage to the enclosure.