ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 75)

5-8 ADS RainAlert II Manual
4. Select the checkboxes corresponding to the devices you want to
assign to the designated monitoring point from the Available
Devices selection box. A checkmark must display beside a
device in the Monitoring Point Devices section to ensure
Profile includes the device in the LIF. Deselect the
checkboxes corresponding to the devices you want to remove
from association with the selected monitoring point from the
Available Devices section.
Note: Profile selects the Rain device for the RainAlert II
monitor by default.
The selected devices display in the Monitoring Point Devices
section.
5. As necessary, edit the parameters specific to each device as
follows:
 Access the device parameters by selecting (highlighting)
the device you want to edit in the Monitoring Point
Devices section and then selecting the Edit button.
 Refer to the following sections for details concerning the
specific device parameters.
6. Once you have edited the devices as necessary, select the OK
button to save the devices to the LIF.
Editing the Rain Device
Edit the parameters for rain device in the following way, and select
OK when complete:
Edit Rain Parameters dialog