ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 28)

Hardware Installation 3-7
Installing the Tipping Bucket
Install the tipping bucket in the following way:
Note: Although ADS offers a heavyweight base plate or a
sun shield with mounting holes to secure the tipping
bucket, you also can implement your own tipping bucket
mounting scheme. Tipping bucket vendors offer several
different options for securing their buckets to walls, poles,
and other surfaces. Please consult ADS if other mounting
options are required.
Note: The base plate used when installing the tipping
bucket, monitor, and sun shield is not designed to be
attached or secured to the surface on which it is set.
Therefore, select a suitable location to place the plate and
the corresponding hardware so they will not be adversely
affected by existing or potential conditions inherent to the
location. ADS is not responsible for any injuries,
damages, claims, or liability resulting directly or indirectly
from the use of this installation guide or the installation of
any ADS equipment.
1. Attach the tipping bucket to the base plate or the sun shield
based on the installation scenario:
 Tipping Bucket Alone If the tipping bucket is installed
in a separate location from the monitor, attach the tipping
bucket to the base plate using the screws provided.