ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 86)

Configuration and Activation 5-19
Configuring the Power Savings
Parameters
Use the Power Saving function when you want to configure the
monitor to conserve battery power. Battery power is conserved by
powering down the wireless modem during specific hours of the
day. The monitor automatically powers up the wireless modem
each day between 11AM and 12PM to receive incoming calls.
However, you also can configure the modem for specific on/off
times for each day of the week.
Note: Alarms will be sent out even when the modem is in
Power Savings mode.
Complete the parameters of the Power Saving Configuration
window through the Diagnostics tool in Profile according to the
schedule best suited to your project. Configure the power saving
parameters for the monitor as follows:
1. Select the monitor location for activation from the Profile main
screen, and then click on the Diagnostics toolbar button.
Diagnostics toolbar button
The Monitor Diagnostics dialog displays.