B&G HS2000 - Manual (Page 18)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-5
After a specific page has been selected, pressing the Scroll Up Key
selects the upper display. Similarly, operation of the Scroll Down
Key selects the lower display.
2.1.5 Enter/Reset Key
The principle use of the Enter Key is to invoke selections chosen
from the menu by the Scroll Keys. As a general rule, when any
menu choice is flashing, pressing the Enter Key will select that
choice. The Enter Key is also used to:
(a) Enter Data. When the data displayed requires
changing press the Enter Key. The selected value flashes
and by using the Scroll Up or Scroll Down Keys the data
is changed. Press the Enter Key again to complete the
operation.
(b) Accept and Reset Alarms. When an alarm sounds (if
the audible warning is fitted) or flashes at the FFD, two
presses of the Enter Key stops the warning and resets the
alarm.
(c) Expand Function Displays. When displaying the Log
and Timer functions the Enter Key can be used to expand
the display. Normally the Log function displays distance to
two decimal places, i.e. 99.99nm (maximum). One press of
the Enter Key expands the display to 0099nm, giving a
maximum available display of 9999nm, if required. Similarly
the Timer function normally displays a minutes and
seconds reading. Expansion by the Enter Key displays
hours and minutes instead.
2.1.6 Speed/Depth (SPD/DEP) Key
By pressing the SPD/DEP Key the user is able to select any one of
three factory set displays accessing the Speed and Depth functions.
Successive operation of the SPD/DEP Key will display the following
information in a fixed order:
Boat Speed/Depth
Boat Speed/Speed Over Ground
Boat Speed/Apparent Wind Angle
2.1.7 Navigation (NAV) Key
By pressing the NAV Key the user is able to select any one of three
factory set displays accessing the Navigation functions. Successive
presses of the NAV Key will display the following information in a
fixed order: