B&G HS2000 - Manual (Page 21)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-8
2.4.2 Page Display Configuration
To store the setting in Paragraph 2.5.1 as a permanent new page,
proceed as follows:
(1) Press Scroll Up or Scroll Down and scroll text until
CNFG DSP is shown on the display.
Note
Scroll Up or Scroll Down can be used because we are configuring
the whole page; both upper and lower displays.
(2) Press Enter, PAGE is shown on the lower display.
(3) Press Enter, the digital display is blanked and the two
functions selected are displayed in the upper and lower
displays.
(4) Press Enter to accept the new page configuration and
restore the digital display.
As you become increasingly familiar with the system you will be able
to set up each FFD on the boat for the crew members in the vicinity.
Each crew member will be able to develop their own pages for the
information most often required.
All page displays are held permanently in the display memory,
independent of the power supply.
2.4.3
NAV Key Configuration
Our second example is configuring the NAV key. The NAV key may
be configured to display either Rhumb Line or Great Circle navigation
information. To select the required mode, proceed as follows:
(1) Press the Page Key once.
(2) Press Scroll Up until the upper display shows CNFG
DSP flashing.
(3) Press Enter, the upper text now shows PAGE flashing.
(4) Press Scroll Up to select either NAV MODE GC
(Great Circle) or NAV MODE RH (Rhumb).
(5) Press Enter to select your desired choice. The display
will stop flashing.
2.4.4 Damping Adjustment - Boat Speed