B&G HS2000 - Manual (Page 26)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-13
2.6.5 Disable Alarms
(1) Select any function with an alarm facility, for example,
DEPTH.
(2) If function is in the upper display, press Scroll Down to
scroll to ALARMS, or if function is on the lower display use
the Scroll Up Key. Then press Enter, ALL OFF appears
flashing.
(3) Press Enter again, all alarms are turned OFF and the
normal page display will be restored.
WARNING - All alarms in the system will remain OFF until the
values are reset or the individual alarms are turned on again.
2.7 TRIP FUNCTIONS
The HS 2000 System provides two trip functions Trip Log and Dead
Reckoning. The functions can be reset and restarted as required, for
example, for keeping a separate log of elapsed distance for a given
passage.
When any trip function is started, all other trip functions which have
been reset start simultaneously.
When a trip function is displayed, the two right hand characters show
the status of that function.
The letters MS (Minutes/Seconds) and NM (Nautical Miles)
indicate the function is running.
The letters RE denote RESET, where the function is zeroed
and waiting to be started.
The letters FR denote FROZEN, where the displayed value
is frozen but the function is still counting in the background.
2.7.1 Fast Reset
The HS 2000 System incorporates a Fast Reset feature for all trip
functions (Trip Log and Barometric Pressure Trend). Fast Reset can
be initiated either by operation of a Remote Push-Button (see
Paragraph 2.1.9) or by operation of the Enter Key on any FFD.
Note
If two trip functions are displayed simultaneously, the Fast Reset
facility will only reset the function shown in the upper display.
2.7.2
Reset Trip Log
(1) Display TRIP LOG in the upper display.