B&G HS2000 - Manual (Page 19)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-6
Current Heading/Course Over Ground
Current Heading/Boat Speed
Distance to Waypoint/Bearing to Waypoint
Note
The NAV key may be configured to show waypoint information in
either Great Circle or Rhumb modes. Refer to section 2.4.3 for
further details.
2.1.8 Temperature (TEMP) Key
By pressing the TEMP key the user is able to select any one of two
factory set displays accessing the temperature functions. Successive
presses of the TEMP key will display the following information:
Sea Temperature/Depth
Air Temperature/Depth
2.1.9 Remote Push-Button Operation
Each FFD may be used with an optional Remote Push-Button. This
allows basic control of the associated FFD from a remote position.
The Remote Push-Button has two functions: page selection and fast
reset.
Page selection is achieved by successive pressing of the Remote
Push-Button. When pressed, each of the four user defined pages are
displayed, followed by the first page of the factory set pages for
Speed/Depth, Navigate and Temp.
When any one of the trip functions is selected at the associated FFD,
pressing and holding down the Remote Push-Button for two seconds
will change the display to show RESET flashing. Pressing the
Remote Push-Button again will Reset that function. After a reset the
display will revert to normal page set-up.
2.2 20/20 DISPLAY
The 20/20 is a fully programmable, single function display,
incorporating a large digit display which can be installed at any
location in the boat.
Control of the 20/20 Display may be achieved from any FFD or from
an optional Remote Push-Button (see Part 5 - Options).
2.3 SUPER HALCYON 3 AND HALCYON 2000 COMPASS
The Super Halcyon 3 and Halcyon 2000 Compasses are high
performance electronic transmitting compasses which interface with
your HS 2000 System. Heading and direction information can be