B&G HS2000 - Manual (Page 68)

HS 2000 User Manual
Part 5 - Options
HB-0846-03
5-5
(2) Using the Scroll Down Key cycle through the 20/20
numbers and select the required Display Number.
(3) Using the Scroll Up Key cycle through the 14 pre-set
functions until the required function is displayed on the
FFD. Release the Scroll Up Key.
(4) If the function is missed, press and hold down the
Scroll Up Key and the functions will cycle through in
reverse order. Release the Scroll Up Key when the
required function is displayed.
(5) Press the Page Key. The FFD will now return to
normal operation and the 20/20 display the selected
function.
5.3.5 Re-configuring 20/20 Display
In addition to the 14 pre-set functions, any one of the 20/20
Displays may be re-configured to show any other function
available to the system. This feature allows any 20/20 to be set-up
to show the information most useful to the user at that station in
the vessel.
The procedure for re-configuring a 20/20 function is as follows:
(1) At the FFD, press and hold down the Page Key for at
least 3 seconds. The FFD will change to show the
function displayed on the 20/20 together with the display
number.
(2) Using the Scroll Down Key, cycle through the 20/20
numbers and select the one required
(3) Using the Scroll Up Key select the function you wish
to change.
(4) Press the Enter Key and the function currently being
displayed on the 20/20 will start to flash.
(5) Press and hold down the Scroll Up Key and cycle
through the normal FFD menu until the required function
choice is displayed (e.g. NAVIGATE).
(6) Press and hold down the Scroll Down Key until the
required operational choice is displayed (e.g. COURSE).
(7) Press the Enter Key to accept the selection.
(8) Press the Page Key, the FFD will return to normal
operation and the 20/20 displays the newly configured
page.