B&G HS2000 User Manual
Page 52
HS 2000 User Manual
Part 4 - Installation Information
HB-0846-03
4-3
PART 4 - INSTALLATION INFORMATION
4.1
INTRODUCTION
This part of the manual contains information relating to the
interconnection of the units that make up the HS 2000 system. It is
provided to enable qualified technicians to fault find or undertake
the installation of additional units and thereby increase the number
of functions available.
The information provided consists of drawing sheets showing
equipment options and the interconnections between them.
Included on the installation data sheets are details of cables, cable
colours, instructions for installation and Notes to assist the
technician.
The installation sheets following are:
1. Alarm Unit, Network and Power Supply
2. Network Terminator
3. Super Halcyon 3 Compass
4. Twin XTL Fins Gravity Switch
5. Change Over Switch
6. Depth Transducer and Paddle/Sea Temperature Sensor
7. Triducer Installation Sheet
8. HS 2000 System Example
9. NMEA Full Function Display
10.Non-NMEA Full Function Display
11.Halcyon 2000 Compass
Note
All screens should be clamped and connected under the metal
clamp bar located on the processor box.