B&G HS2000 - Manual (Page 22)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-9
Our second example is the entry of a damping value. To ascertain
whether it is possible to damp a function, you should check the table
in Paragraph 2.10 - Operating Functions.
(1) Using the Scroll Up or Scroll Down Key select the
upper or lower display as required.
(2) If BOAT SPD is shown in the upper display, press and
hold Scroll Down and scroll to DAMPING, which flashes. If
BOAT SPD is shown in the lower display, use Scroll Up.
(3) Press Enter, the current damping value will be
displayed on the upper or lower display, as appropriate.
(4) Press Enter, the DAMPING value will start to flash.
(5) Press Scroll Up or Scroll Down to increase and/or
decrease the damping value, as required.
(6) Press Enter to accept new value.
(7) Press Page to return to full display.
Damping control for any of the other functions that can be damped is
achieved in a similar manner.