B&G HS2000 - Manual (Page 25)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-12
For example, when the SECTOR alarm is turned on, the alarm
reference heading is the current compass heading. If the SECTOR
alarm is set at 40°, the sector value is the compass heading +/- 20°.
It is therefore important to switch off the SECTOR alarm before
carrying out a course alteration and switching the alarm on again
when settled on the new course heading.
Any alarm can be turned ON and OFF individually, or all alarms can
be turned OFF collectively.
2.6.3 Set Lo Alarm - Depth
(1) Select function which requires alarm facility, for
example, DEPTH.
(2) If the selected function is in the upper display, press
Scroll Down and scroll the lower display until ALARMS
appears, flashing. If the selected function is in the lower
display use Scroll Up.
(3) Press Enter, the text shows ALL OFF flashing.
(4) Use Scroll Up or Scroll Down, as appropriate, and
scroll through until the text shows LO ALARM flashing.
(5) Press Enter, the display shows the current LO ALARM
value.
(6) To change the LO value, press Enter, the value
flashes.
(7) Press Scroll Up or Scroll Down to increase or
decrease the value, as required. Press Enter to accept the
new value and turn the alarm ON.
(8) Press Page to return to the normal display.
To access the HI alarm, scroll through the text until HI ALARM
appears and press Enter to reveal current HI Alarm value. To
change the value, use the same procedure as used to change the
LO alarm value.
2.6.4 Switch Alarms - On/Off
To turn off an alarm (HI, LO or SECTOR), scroll through the menu
until the required item (for example, HI OFF) appears in the upper
display and press Enter.
To turn ON an alarm, scroll through until the required item (for
example, LO ON) appears in the upper display and press Enter.