Pre-installation, Special tools, Unpacking – Dell PowerVault 136T LTO/SDLT (Tape Library) User Manual

Page 17: Start installation

Advertising

Back to Contents Page

Installation: Dell

™ PowerVault™ 136T LTO Library User's Guide

This chapter contains step by step procedures for installing all models of the Dell PowerVault 136T LTO Library and optional features.

Pre-Installation

The Dell PowerVault 136T LTO Library can be installed in a rack or as a stand-alone model.

Parts required for installation are shipped with each library. When unpacking the library and removing the packing material, do not lose or
misplace any enclosed parts.

Two door keys shipped with each library are used to lock and unlock the front door.

Step 1 Familiarize yourself with these instructions before proceeding with the installation tasks.

Step 2 Understand the requirements for connecting cables between the host and the Dell PowerVault 136T LTO Library and all tape drives. Refer
to

Quick Start Guide

for more information.

Special Tools

No special tools are required to install the Dell PowerVault 136T LTO Library. A standard CE tool kit is all you need to install the library.

Unpacking

Use the instructions supplied with the Dell PowerVault 136T LTO Library to unpack. When you remove the packing material from the palette, put
the parts in a safe area so they will not get damaged.

Start Installation

Use the following table to start your installation.

Table 1. Start Installation

Installing a Stand-alone Library

Installing the Dell PowerVault 136T LTO Library in a
Rack

Installing a Tape Drive Module

Installing a Redundant DC Power Supply

Installing the Dell PowerVault 136T Fibre Bridge