Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 81)

Operator Information Messages
Table 3 describes the operator information messages. Each information message is a single line.
Table 3. Operator Information Messages
Firmware Download Procedure
The Firmware is downloaded through the Remote Management Unit. Refer to Figure 11 in the Operation section of the Dell PowerVault 136T LTO
Library User's Guide, and go to the Firmware Tab in the RMU.
Back to Contents Page
DUPLICATE LABEL
Please check volsers at
element address
[%X and %Y] %X = element address
%Y = element address
SER NUMBER MISSING
Please enter the system serial
number via the monitor. None
Your library firmware versions
do not match.
Download the
latest version to the library.
None
One or more drives have
downlevel firmware. You may
wish to update these drives.
See User's Guide .
None
Message Lines Variables
INITIALIZING None
OFFLINE None
ONLINE None
HOMING PICKER None
TEACHING COLUMN [%X] %X = column number
SCANNING COLUMN [%X] %X = column number
INITIALIZING DRIVES None
GOING READY None
DOOR IS OPEN None
PICKER HOME FAIL None
PICKER NOT HOME None
GOING ONLINE None
GOING OFFLINE None
-=>ERROR!<=- None
REBOOTING None
CARTRIDGE RECOVERY None
CARTRIDGE IN PICKER None
SELF TEST FAILED None