Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 53)

l
If the button beneath the Change softkey is pressed, the value of the current field is toggled.
l If the button beneath the Next softkey is pressed, the first field in the list is made the active field.
l If the button beneath the Cancel softkey is pressed, the Library Submenu is displayed.
RMU Dialog
When RMU is selected, the RMU Dialog is displayed. See Figure 68 . This option allows the user to view the Remote Management Unit (RMU)
information.
Figure 68. Setup > Library > RMU Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the Up softkey is pressed, the active field is increased.
l
If the button beneath the Down softkey is pressed, the active field is decreased.
l If the button beneath the Next softkey is pressed, the active field is accepted and the next field in the list is made the active field.
l If the button beneath the Cancel softkey is pressed, the Library Submenu is displayed.
Drives Submenu
When Drives is selected, the Drives Submenu is displayed. See Figure 69 . This submenu contains a collection of routines to setup the drives. This
submenu offers two selections.
Figure 69. Setup > Drives Submenu
To choose one of the two selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the SCSI softkey is pressed, the SCSI Dialog is displayed.
l
If the button beneath the Back softkey is pressed, the Setup Menu is displayed.
SCSI Dialog
When SCSI is selected, the SCSI Dialog is displayed. See Figure 70 . This option allows the user to set the SCSI ID of the drive.
Field Value Description
IP 000.000.000.000 .. 255.255.255.255 Indicates the IP address
Sub 000.000.000.000 .. 255.255.255.255 Indicates the Subnet mask
Gate 000.000.000.000 .. 255.255.255.255 Indicates the Gateway
Name A .. Z, 0 .. 9
Indicates the host name assigned to the RMU for communication
with the library via the RMU