Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 59)

Change Password Dialog
Set/Change Password is the currently active blackened field. Refer to Figure 77. If the button beneath the Change softkey is pressed, then OK is
selected, the Change Password Dialog is displayed.
Figure 82. Setup > Utils > Secure > Change Password Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the old or new password is entered. Refer to Figure 82.
¡ If the the correct password is entered into the Old field, then press the button beneath the OK softkey.
n
Next, enter the new password into the New field, then press the button beneath the OK softkey. The password is changed, but
it is not saved. See
Figure 83 .
NOTE: The security change to the password is not saved until the button beneath the OK softkey is pressed in the Secure
Dialog screen. To cancel the password change, press the button beneath the Cancel button in the Secure Dialog screen.
l If the button beneath the Up softkey is pressed, the currently selected field is increased.
l If the button beneath the Next softkey is pressed, the current field is accepted and the next field is made the active field.
l If the button beneath the Cancel softkey is pressed, the Secure Dialog is displayed.
Figure 83. Setup > Utils > Secure > Password Changed Dialog
To choose the option, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the Secure Dialog is displayed.
Service Menu Selection
The Service Menu is primarily used to provide various routines associated with maintaining the system. Service is selected from the Main Menu
alternate screen by following this procedure.
NOTE: Commands listed under the Service Menu Selection require an offline state. Refer to Using Commands That Require an Offline
State for more information.
Step 1 Press the button beneath the Service softkey from the Main Menu (Alternate Screen) Screen .
l The Service Menu appears. This menu offers four selections. See Figure 84 .
Field Value Description
Old 0000 .. 9999 Current password
New 0000 .. 9999 New password