Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 90)

Clicking any tab, other than the Status tab, initiates a Login dialog. See Figure 7 .
Figure 7. Login Dialog
NOTE: After the Admin user has initially logged into the RMU, Dell recommends that the Admin user change the default password. No
regular user can log into the RMU while an existing Admin user is logged into the RMU. Only one regular user can be logged into the RMU at
a time.
The Configuration dialogs and descriptions are indicated below.
Library
Firmware
This field value indicates the current level of library firmware.
RMU
Firmware
This field value indicates the current level of RMU firmware.
Field Description
Enter Login Name The user enters his/her user name. The default user name is admin and it is case sensitive.
Enter your
password
The user enters his/her password. The default password is password and it is case sensitive.
Submit
The user submits the name and password for login verification. If either user name or user password is not verified, the
login is rejected.