Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 52)

To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the Up softkey is pressed, the value of the current field is increased.
l
If the button beneath the Down softkey is pressed, the value of the current field is decreased.
l If the button beneath the Next softkey is pressed, the next field in the list is made the active field.
¡ If the next field is the Parity field, see Figure 66 .
l If the button beneath the Cancel softkey is pressed, the Library Submenu is displayed.
Figure 66. Setup > Library > SCSI > Parity Dialog
To choose one of the four selections, follow the step.
Step 2 Press the button beneath the desired softkey.
l
If the button beneath the OK softkey is pressed, the values of the fields are accepted.
NOTE: The library must be restarted for changes to take affect.
l If the button beneath the Yes/No softkey is pressed, the value of the current field is toggled.
l If the button beneath the Next softkey is pressed, the next field in the list is made the active field. If the next field is the Library sign-on
field, see
Figure 67 .
l If the button beneath the Cancel softkey is pressed, the Library Submenu is displayed.
Figure 67. Setup > Library > SCSI > Library Sign-On Dialog
To choose one of the four selections, follow the step.
Step 3 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the values of the fields are accepted.
NOTE: The library must be restarted for changes to take affect.
Parity
Yes Enable Parity (default)
No Disable Parity
Library sign-on
PV-136T PowerVault 136T LTO Library
Scalar 100 EMU Library emulation
Field Value Description
Parity
Yes Enable Parity (default)
No Disable Parity
Field Value Description
Library sign-on
PV-136T PowerVault 136T LTO Library
Scalar 100 EMU Library emulation