Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 73)

Figure 121. Main Menu > More > About Menu
To choose one of the two selections, follow the step.
Step 2 Press the button beneath the desired softkey.
l
If the button beneath the OK softkey is pressed, the Main Menu Selection (alternate screen) is displayed.
l If the button beneath the Details softkey is pressed, the Details Dialog is displayed.
Details Dialog
When Details is selected, the Details Dialog is displayed. Refer to Figure 122 . This option is used to view the library current application and boot
code for the picker, drive modules, and display. This dialog offers two options.
Figure 122. About > Details Dialog (initial screen)
NOTE: All field values are read only.
To choose one of the two selections, follow the step.
Step 3 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the Main Menu Selection (alternate screen) is displayed.
l If the button beneath the Details softkey is pressed, the follow on dialog is displayed. See Figure 123 .
Figure 123. About > Details Dialog (secondary screen)
To choose one of the two selections, follow the step.
Step 4 Press the button beneath the desired softkey.
l
If the button beneath the OK softkey is pressed, the Main Menu Selection (alternate screen) is displayed.
l If the button beneath the Details softkey is pressed, the follow on dialog is displayed. See Figure 124 .