Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 56)

Config Dialog
When Config is selected, the Config Dialog is displayed with the default settings. See Figure 75 . This option sets the library configuration.
Figure 75. Setup > Utils > Config Dialog
To choose one of the four selections, follow the steps.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the current field values are accepted, and Utils Submenu is displayed.
l
If the button beneath the Yes/No softkey is pressed, the selected field is changed to Yes or No.
l If the button beneath the Next softkey is pressed, the next field in the list is made the active field. If the next field is the last field, see
Figure 76 .
l
If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.
Figure 76. Setup > Utils > Config > Mailbox Dialog
To choose one of the four selections, follow the step.
Step 2 Press the button beneath the desired softkey.
l
If the button beneath the OK softkey is pressed, the current field values are accepted and Utils Submenu is displayed.
NOTE: The library must be restarted for changes to take affect.
l If the button beneath the Change softkey is pressed, the Mailbox field value is changed to Import/Export or Storage.
l If the button beneath the Next softkey is pressed, the Config Dialog is displayed.
l
If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.
Field Value Description
Backlight on
Yes Turns on the backlighting
No Turns off the backlighting
Audio on
Yes Enables audio output
No Disables audio output
Scan on Init
Yes The picker will scan for all cartridges upon library initialization
No The picker will not scan for all cartridges upon library initialization
Touch on Init
Yes Unlabeled tape inventory support
No No unlabeled tape inventory support
Mailbox
Imprt/Exprt The mailbox is configured as a cartridge import/export location
Storage The mailbox is configured as cartridge storage cells
Field Value Description
Mailbox
Imprt/Exprt The mailbox is configured as a cartridge import/export location (default)
Storage The mailbox is configured as cartridge storage cells